Insufficient Authority to Socket

General discussion of the Co:Z Toolkit
Post Reply
jroy8
Posts: 2
Joined: Thu Sep 19, 2013 3:25 pm

Insufficient Authority to Socket

Post by jroy8 »

Since the install to Co:Z SFTP version: 5.5.0, we're receiving the following message when trying to transfer a mainframe file to a remote user:

ICH408I USER(xxxx ) GROUP(PROD ) NAME(PROD ID - SYS SUPP )
CL(FSOBJ )
INSUFFICIENT AUTHORITY TO SOCKET

Using Co:Z SFTP version: 4.2.0, the Insufficient Authority message does not appear.

This does not affect the successful execution of the job but we did notice under 5.5 while running the debug, it appears to be using local-port=0.
Connection established, local_addr=xx.xx.xx.81 local_port=0 remote_addr=xx.xx.xx.50 remote_port=22
The same connection message under 4.2 displays:
Connection established, local_addr=xx.xx.xx.134 local_port=26876 remote_addr=xx.xx.xx.50 remote_port=22

Any help would be appreciated.
dovetail
Site Admin
Posts: 2022
Joined: Thu Jul 29, 2004 12:12 pm

Re: Insufficient Authority to Socket

Post by dovetail »

If you have an Enterprise License and Support agreement, please open a ticket.

This looks to be an issue with the installation process.
It appears that your "ssh-socket-info" program is not setup properly.

See: https://dovetail.com/docs/cozinstall/in ... l#inst_coz
jroy8
Posts: 2
Joined: Thu Sep 19, 2013 3:25 pm

Re: Insufficient Authority to Socket

Post by jroy8 »

Thank you for the suggestion to re-install the release. That has resolved the issue.
Post Reply